Mitsubishi MOTORS Outlander PHEV 2016 User Manual (English)

Questions and Answers:

J
Judy SmithAug 13, 2025
Why does quick charge discontinue on my Mitsubishi MOTORS Automobile?
- B
  Barry MitchellAug 13, 2025
  Charging is designed to stop when the drive battery capacity reaches 80%. If you need to charge the drive battery more than 80%, start the charging procedure again. Also, charging will stop depending on the timer function setting of the quick charge device. If you need to charge the drive battery more, start the charging procedure again. Check whether the power supply for the quick charger is off. Consult an administrator or a maker of the quick charger.
J
James ThorntonAug 17, 2025
How to troubleshoot charging that cannot be started on my Mitsubishi MOTORS Automobile?
- T
  Tara BrooksAug 17, 2025
  The vehicle or charging cable may have a malfunction. Confirm if the warning lamp on the meter is illuminated. Confirm if the indicator on the control box is indicating a malfunction. If a warning is displayed, stop charging and contact a MITSUBISHI MOTORS Authorized Service Point. Also, charging cannot be performed if the drive battery is already fully charged, or the temperature of the drive battery is too high or too low to charge. The drive battery can not be charged if the vehicle electrical systems cannot be turned on. If the auxiliary battery is discharged, charge or emergency start the auxiliary battery. Put the operation mode of the power switch in "OFF" before charging.
J
Jamie FosterAug 20, 2025
What to do if quick charging cannot be started on Mitsubishi MOTORS Automobile?
- E
  ellistinaAug 20, 2025
  Check that the charge connector is connected correctly and that it is locked. If the self-diagnostic function of the quick charge device returns a negative result, there is a possibility that the vehicle has a malfunction, so stop charging and contact a MITSUBISHI MOTORS Authorized Service Point. Check the power switch of the quick charger and consult an administrator or a maker of the quick charger.
C
crogersAug 25, 2025
Why is normal charging discontinued on my Mitsubishi MOTORS Automobile?
- J
  joshua16Aug 25, 2025
  There may have been an electrical power failure, or the breaker may have failed. Charging will resume when the power source is reset. Check that the EV charging cable has not been disconnected. If the charge connector button is pressed for a long period of time, charging will be stopped, so start the charging procedure again. Also, confirm the drive battery temperature. Charging will stop depending on the timer function setting of the normal charge device, so try it again with cancelling the timer settings.
M
Michael LopezAug 28, 2025
What to do if normal charging cannot be started on my Mitsubishi MOTORS Automobile?
- R
  Robert RomeroAug 28, 2025
  Confirm that there has not been a power failure and make sure the breaker is on. If an outlet with a timer device installed is used, power will only be available at the time set by the timer. Confirm if the POWER indicator on the control box is illuminated. Confirm the charge connector is connected correctly. If the charge connector was connected and disconnected repeatedly in a short time, disconnect the charge connector, wait for a while, then start charging procedure again from the beginning.
D
Dr. Carl CaldwellSep 1, 2025
What to do if normal charging is discontinued because the Charging timer was set up by the MITSUBISHI Remote Control on Mitsubishi MOTORS Automobile?
- B
  Beth JohnsonSep 1, 2025
  Cancel all the charging timer settings because charging is automatically restarted if you cancel the charging timer.
E
emilyclarkeSep 4, 2025
What to do if Plug-in Hybrid EV System does not start after quick charging on Mitsubishi MOTORS Automobile?
- B
  Bryan CarpenterSep 4, 2025
  There is a possibility that the vehicle has a malfunction. After turning the operation mode of the power switch to “ON” and putting the select position to “N”, ask the support of the fellow passenger or people nearby to move the vehicle by pushing it into safety. After moving, contact a MITSUBISHI MOTORS Authorized Service Point.
R
riverasuzanneSep 8, 2025
What does it mean if the charging indicator is continuously blinking even if the quick charge connector is not connected into the quick charge port when you start the plug-in hybrid EV system after quick charging on Mitsubishi MOTORS Automobile?
- C
  cookwilliamSep 8, 2025
  Perform quick charging again and finish it normally or contact a MITSUBISHI MOTORS Authorized Service Point, because quick charging has not finished normally.