EasyManuals Logo

Mitsubishi MOTORS Outlander PHEV 2016 User Manual

Mitsubishi MOTORS Outlander PHEV 2016
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #417 background imageLoading...
Page #417 background image
WARNING
l
If it is necessary to do work in the engine
compartment with the plug-in hybrid EV
system starting, be especially careful that
your clothing, hair, etc., does not become
caught by the cooling fans, drive belts, or
other moving parts.
l
The cooling fans can turn on automatical-
ly even if the plug-in hybrid EV system is
stopping. Put the operation mode of the
power switch in OFF to be safe while you
work in the engine compartment.
l
Make sure that the engine and Plug-in
Hybrid EV system has cooled down be-
fore removing the radiator cap and EV
cooling system reserve tank cap, because
hot steam or boiling water will otherwise
gush from the filler port and may scald
you.
l
Do not smoke, cause sparks or allow open
flames around fuel or auxiliary battery.
The fumes are flammable.
l
Be extremely cautious when working
around the auxiliary battery. It contains
poisonous and corrosive sulphuric acid.
l
Do not get under your vehicle with just
the body jack supporting it. Always use
automotive jack stands.
l
Improper handling of components and
materials used in the vehicle can endanger
your personal safety. We recommend you
to consult a specialist for necessary infor-
mation.
WARNING
l
The components inside the engine room
might be very hot to the touch.
To avoid being burnt, make sure all com-
ponents have sufficiently cooled before
beginning an inspection. These compo-
nents are affixed with the label indicating
precautions for handling. Follow the in-
structions on the label.
1- Brake fluid reservoir (RHD)
2- Engine oil level dipstick
3- Engine oil cap
4- Brake fluid reservoir (LHD)
5- Washer fluid reservoir
6- EV cooling system reservoir
7- Engine coolant reservoir
Catalytic converter
E01000202495
The exhaust gas scavenging devices used
with the catalytic converter are extremely ef-
ficient for the reduction of noxious gases.
The catalytic converter is installed in the ex-
haust system.
It is important to keep the engine properly
tuned to ensure proper catalyst operation and
prevent possible catalyst damage.
WARNING
l
As with any vehicle, do not park or oper-
ate this vehicle in areas where combusti-
ble materials such as dry grass or leaves
can come in contact with a hot exhaust
since a fire could occur.
l
Paint should not be applied to the catalyt-
ic converter.
NOTE
l
Use fuel of the type recommended in “Fuel
selection” on page 2-13.
Catalytic converter
11-03
OGGE16E1
Maintenance
11

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi MOTORS Outlander PHEV 2016 and is the answer not in the manual?

Mitsubishi MOTORS Outlander PHEV 2016 Specifications

General IconGeneral
BrandMitsubishi MOTORS
ModelOutlander PHEV 2016
CategoryAutomobile
LanguageEnglish

Related product manuals