6. Pull up the lever, then fold the seatback
forward.
CAUTION
l
Do not allow any person to sit on the flipped
seat cushion, and do not place luggage on it.
The seat’s mounting fittings could bend un-
der the weight, making it impossible for the
seat to be retained on the vehicle.
To return
1. Raise the seatback until it locks securely
into place.
2. While lifting the seat belt’s buckle (A),
gently lower the seat cushion. Make sure
that there is a hook (B) at the position
shown in the illustration.
3. Push down the seat cushion until it locks
into place.
4. Make sure the seat belt’s buckle is on
the seat cushion.
Making a flat seat
E00404301931
By removing the head restraints and fully re-
clining the seatbacks of the seats, one large
flat seat is achieved.
WARNING
l
Never drive with passengers on the flat
seat. This is highly dangerous.
Making a flat seat
5-08
OGGE16E1
Seats and seat belts
5
To Next Page
Loading...
Need help?
General
