Defective clutch master Replace master cylinder
Defective clutch slave Replace slave cylinder
Air in hydraulic system Bleed hydraulic system
Rattling Weak or broken release Replace spring and
lever spring check alignment
Damaged pressure plate Replace pressure plate
Broken clutch return spring Replace return spring
Worn splines on clutch disc Replace clutch disc
or input shaft and/or input shaft
Worn clutch release bearing Replace release bearing
Dry or worn pilot bearing Lubricate or replace
pilot bearing
Unequal release lever Align or replace
contact release lever
Incorrect pedal free play Adjust free play
Warped or damaged clutch Replace damaged
disc components
Slipping Pressure springs worn or Release pressure plate
Oily, greasy or worn Clean or replace clutch
facings disc
Incorrect clutch alignment Realign clutch assembly
Warped clutch disc or Replace damaged
pressure plate components
Binding release levers or Lubricate and/or
clutch pedal replace release
components
Squeaking Worn or damaged release Replace release bearing
Dry or worn pilot or Lubricate or replace
release bearing assembly
Pilot bearing turning in Replace pilot bearing
crankshaft and/or crankshaft
Worn input shaft bearing Replace bearing and
seal
Incorrect transmission Realign transmission
alignment
Dry release fork between Lubricate release fork
pivot and pivot
Heavy and/or Sticking release bearing Replace release bearing
Stiff Pedal sleeve and/or sleeve
To Next Page
Loading...
