Vehicle care and maintenance
7-13
7
3. Unclamp the cover. Open up the top of the cover and take
out the air cleaner filter.
4. Replacing the air cleaner filter and put the cover back on
in its original position.
OTE
● Genuine Mitsubishi Motors Parts are recommended when
replacing the air cleaner filter.
● Make sure that the connector is properly reconnected.
● After replacing the air cleaner filter, make sure that the
hinges at the bottom of cover are firmly set.
Type 1
Type 2
CAUTION
!
● Take care not to scratch the engine air flow sensor
when removing the air cleaner cover.
BK0150700US.book 13 ページ ２０１２年３月２２日 木曜日 午後６時４６分
To Next Page
Loading...
