Mitsubishi 2013 Outlander

Vehicle care and maintenance
7-63
7
2. Turn the socket and bulb assembly counterclockwise to
remove it.
N
OTE
● The rear side-marker light, and the tail and stop light uses
an LED instead of the bulb.
Check with an authorized Mitsubishi Motors dealer or a
repair facility of your choice when the light needs to be
repaired or replaced.
3. Pull the bulb out of the socket.
B- Rear side-marker light, and tail and stop light (LED)
- cannot be replaced
C- Rear turn signal light
BK0150700US.book 63 ページ ２０１２年３月２２日 木曜日 午後６時４６分
Information Provided by: