STARTING AND DRIVING
5–38
I10A125a
To reduce the set speed
There are 2 ways to reduce the set speed.
Auto–speed control lever
Pull down and hold the auto–speed control
lever until you reach the lower speed you
want. Release the lever when the desired
speed is reached.
To slow down in small amounts, just pull
down the auto–speed control lever for less
than 0.5 second and release it. For each op-
erate, you will slow down by about 2.0 km/h.
I10A128a
Brake pedal
Use the brake pedal to reduce the vehicle’s
speed and, when the desired speed is re-
ached, pull down the auto–speed control
lever.
I10A121a
To accelerate for passing
Depress the accelerator pedal in the normal
way. When the pedal is released, your ve-
hicle will return to the set speed.
To Next Page
Loading...
