INSTRUMENTS AND CONTROLS
4–26
G15B086d
Digital clock
EG15BAIe
Following modes are available for clock adjustment:
D MITSUBISHI genuine audio:
“Auto mode” and “Manual mode”
D Non genuine audio:
“Manual mode” only
Selection of “Auto mode” or “Manual mode”
(MITSUBISHI genuine audio only)
1. Switch off the audio once by pressing the PWR switch (1).
2. While pressing the CH4 button (2), press the PWR switch (1)
until it beeps.
“CT” displayed: Auto mode
“CT” not displayed: Manual mode
For manual time adjustment, please refer to “Manual mode” below.
Auto mode
(MITSUBISHI genuine audio only)
The automatic adjustment mode can set the local time automatically
by using the signal from the local RDS stations. In this mode, “CT” (A)
(Clock Time: sent with the RDS signal) is shown in the audio display.
To Next Page
Loading...
