INSTRUMENTS AND CONTROLS
4–27
G15B083d
Manual mode
The manual adjustment mode is also available in case the “Auto
mode” shows the incorrect time when the adjacent local RDS stations
are located in a different time zone.
For manual time adjustment, use the procedure below:
1. Switch off the audio once by pressing the PWR switch (1).
2. While pressing the CH4 button (2), press the PWR switch (1)
until it beeps. The “CT” display (A) disappears and this is the
“Manual adjustment mode”.
3. Set the time by pressing the various buttons as described
below.
H- To adjust the hour
M- To adjust the minutes
SET- To reset the minutes to zero
10:30 - 11:29 ... Changes to 11:00
11:30 - 12:29 ... Changes to 12:00
To Next Page
Loading...
