SEATS AND SEATBELTS
3–8
G26A054a
Adjusting head restraint forward
or backward (Front seat only)
Tilt the head restraint forward to adjust it for-
ward. To adjust it backward, tilt the head re-
straint backward.
G26A075a
Removal of head restraints
EG26BBD
To remove the head restraints, lift the head
restraint with the height adjusting knob (A)
pushed in.
To install the head restraints, first confirm that
they are facing in the correct direction, and
then insert them into the seatback while
pressing the height adjusting knobs (A) in
the direction indicated by the arrows.
G26B021a
Confirm that the height adjusting knobs (A)
are correctly adjusted as shown in the il-
lustration, and also lift the head restraints to
ensure that they do not come out of the seat-
back.
WARNING
It is dangerous to drive with incorrect-
ly adjusted head restraints or without
head restraints installed; always have
them correctly fitted when using the
vehicle.
Failure to do so could cause serious
injury if involved in an accident.
To Next Page
Loading...
