16
Park your vehicle in a safe place and turn the ignition switch to
the "OFF" position or put the Operation Mode in OFF.
Plug in the USB cable that is supplied with your device and
connect the USB end into the USB port located
below the Climate Controls.
Turn the ignition switch or the Operation Mode
to the "ACC" position. Turn on the audio system.
There are 2 ways to access your USB:
• Go to Home Screen and scroll to USB,
press button
• Click on Audio button by Touch Pad on the center console.
Depending on your USB device, it may take longer for playback
to start.
Once the device is selected, playback starts.
A
- Apps
B
- Home
C
- Audio
D
- Volume Up
E
- Volume Down
F
- Power
(IF EQUIPPED)
HD RADIO
Make sure you are on the Home Screen and touch either FM or
the AM button.
1. Once the station you want to save is shown on the screen,
touch and hold the preset boxes on the touch screen until
you hear a beep.
2. Once you hear a beep, the station will be saved to memory.
To select the HD Radio, touch the Smartphone Link
Thin-Display Audio HD Channel icon. The number of
HD Radio will appear in a drop down menu. Select
the designated HD Radio.
Another way to select HD Radio station is to use the touchpad
(if equipped). With the display identifying HD Radio are present,
perform the following:
1. Swipe the touchpad to the left to the radio menu
2. Swipe down to HD Radio
3. Press down on the touchpad to select
4. Swipe through the HD Radio selections
5. Press down on the touchpad to select
The clock adjustment procedure is as follows:
1. Press the HOME key
2. Touch the area where the time is displayed.
The display changes to the clock setting where time and
format can be adjusted.
3. Touch SET
4. To return to the settings, touch BACK
5. The time setting change is completed
ACCESSING AM OR FM STATIONS
Number of USB
ports may differ
A D
B E
C F
To Next Page
Loading...
Need help?
General
