3-62
Features and controls
3
To remove the key
N00550900070
For vehicles with a manual transaxle, when removing the key,
push the key in at the “ACC” position and keep it depressed
until it is turned to the “LOCK” position, and remove.
For vehicles with an automatic transaxle, when removing the
key, first set the selector lever to the “P” (PARK) position, and
then turn the key to the “LOCK” position and remove it.
OTE
● For vehicles with an automatic transaxle, the key cannot
be removed unless the selector lever is set in the “P”
(PARK) position.
Manual transaxle
Automatic transaxle
BK0098300US.book 62 ページ ２００８年１２月８日 月曜日 午前１１時３７分
To Next Page
Loading...
