Symbols or abbreviation
OP Option
R1/4 Taper pipe thread (external) 1/4 inch (formerly PT1/4)
Rc1/8 Taper pipe thread (internal) 1/8 inch (formerly PT1/8)
G1/4A Straight pipe thread (external) 1/4 inch (formerly PF1/4-A)
Rp1/8 Straight pipe thread (internal) 1/8 inch (formerly PS1/8)
Units
1. SI Units are used in this manual.
2. The following table shows the conversion of SI unit and customary unit.
Item SI unit Customary unit
Force
1 N 0.1012 kgf
1 lbf 0.4536 kgf
Pressure
1 kPa 0.0102 kgf/cm
2
1 psi 0.0703 kgf/cm
2
Torque
1 N·m 0.1012 kgf·m
1 lbf·ft 0.1383 kgf·m
To Next Page
Loading...
Need help?
General
