Mitsubishi FDT100VNXWVH - Page 174

-
173
-
'20 • PAC-SM-351
To remove the heat exchanger assembly
(1)
Remove the drain pan.(See No.4)
(2)
Remove 2 pipe lid fixing screws and remove it.(
mark)
(3)
Remove 3 heat exchanger assembly fixing screws and remove it.(
mark)
8.
To remove the Electronic Expansion Valve (EEV)
(1)
Remove the heat exchanger assembly.(See No.7)
(2)
Remove the coil of EEV by pull out on the top.
(3)
Remove welded part of EEV by welding.(
mark)
PROCEDURE & PICTURES
PJF012D045
EEV
Coil of EEV
General view
2
Pipe lid