Tap the
Menu
button on the TOP screen and select
Useful functions
⇒
Timer
2
Tap a desired item on the Timer menu.
・
Set ON timer by hour
・
Set OFF timer by hour
・
Set ON timer by clock
・
Set OFF timer by clock
・
When the timer is set, the
button is displayed.
The button is not displayed unless the timer is set.
Timer
· The Clock setting must be made when the Set ON timer by clock or Set OFF timer by clock is used.
Advice
Timer
Set ON timer by hour
Set OFF timer by hour
Set ON timer by clock
Set OFF timer by clock
Back
Select the item.
Operation of each timer
・Sleep timer
fo trats eht ecnis despale sah tes emit fo tnuoma eht nehw tinu eht fo noitarepo eht spotS
the operation. When the setting is enabled, this timer will activate whenever any operation
starts.
・Set ON timer by hour
When the set time elapses, the air-conditioner starts.
Operating conditions at the start of operation can be set.
Operation takes place once at each setting.
・Set OFF timer by hour
When the set time elapses, the air-conditioner stops.
Operation takes place once at each setting.
・Set ON timer by clock
The air-conditioner starts at the set time.
Operating conditions at the start of operation can be set.
Only one day (Once) operation or operation Everyday can be set.
・Set OFF timer by clock
The air-conditioner stops at the set time.
Only one day (Once) operation or operation Everyday can be set
・Weekly timer
On timer and Off timer on weekly basis can be set.
■Setting of each timer can be combined. Allowable combination settings are as shown below.
Allowable combination setting (○: Allowed, ╳: Prohibited)
Sleep OFF: Hours ON: Hours OFF: Clock ON: Clock Weekly
Sleep ××○○○
OFF: Hours × ××××
ON: Hours × × ×××
OFF: Clock ○×× ○ ×
ON: Clock ○××○ ×
Weekly ○××× ×
If a prohibited combination setting is made, a message “The combination can't be accepted” is
displayed for 3 seconds.
■Priority order of the timer settings (①→③) is as follows.
① Set OFF timer by hour/clock, weekly OFF timer
② Sleep timer
③ Set ON timer by hour/clock, weekly ON timer
■On the TOP screen, the timer is displayed from the earliest one out of OFF time of the sleep
timer, ON time and OFF time.
3
Tap the zone you want to set a zone name for.
4
The zone name input screen is displayed.
The zone name can be set with up to 8 2-byte letters (16 1-byte letters).
You can enter alphanumeric or Cyrillic.
Tap the Back
or Next button to display next character group.
Set
.
5
The zone name that was set is displayed on the zone operation screen.
'22 • PAC-SM-412
-
103
-
To Next Page
Loading...
