Tap the
Menu
button on the TOP screen and select
Useful functions
⇒
Timer
⇒
Set OFF timer by clock
.
2
The Set OFF timer by clock setting screen is displayed.
Select a desired time to stop operation (5-min intervals) with the
▲
▼
buttons.
3
The Zones button is displayed when performing zone settings. Tapping the Zones button makes it possible to perform zone
operation settings
a
t the time of timer working. (The Zones button is not displayed when not performing zone settings. Procee
to step 5 .)
■Set OFF timer by clock
Stops the operation of the unit at the set clock time.
■The Zone
button is displayed when performing zone settings. Tapping the Zone
button will display the set zone states.
Confirm
4
Tapping the Zones
button will transition to the zone operation setting screen. Set No
setting
/
ON
/ OFF (No setting/OPEN/
CLOSE) for each zone at the time of timer working.
→
No setting
→
ON
→
OFF
Setting No setting
will operate in the previous zone state during timer operation.
After the setting, tap the Set
button.
The display returns to the previous screen.
5
After the setting, tap the Set
button. The display returns to the Timer menu screen.
The Set OFF timer by clock can be operated one day (Once) or every day.
If it is operated everyday, tap the Once
/
Everyday
button to change the display to
Everyday
.
1
When you tap the
button on the Timer menu screen, the contents of the current timer settings are displayed.
■When the warming up is set,
en.
'22 • PAC-SM-412
-
107
-
To Next Page
Loading...
