Mitsubishi FDUA125VNPWVH - Page 110

9
Select a desired temperature (at 1°C
intervals) with the
▲ ▼
buttons. Or tap the
Auto
button to select the Auto temp
setting.
Tap the
Set
button after the
selection. (
☞
7 )
When the
No setting
button is
tapped, “
-- °C” is displayed, and it
starts operation at the last setting
temperature.
Weekly timer
No setting Back
Tap
▲▼
to set temp & tap [Set].
Auto
Set
10
.deeps naf derised a paT
When the
No setting button is
tapped, starts operation at the last
fan speed. (☞7 )
11
eht ta stnetnoc derised gnittes retfA
screen of 7 , tap the
Set button.
Weekly timer
No setting Back
Select the fan speed.
Auto
12
Tapping the Zones button will
transition to the zone operation setting
screen. Set No
setting / ON / OFF
(No setting/OPEN/CLOSE) for each
zone at the time of timer working.
→
No setting
→
ON
→
OFF
Setting No setting will operate in the
previous zone state at the time of timer
working.
After the setting, tap the Set
button.
The display returns to the previous
screen.
7
Set the following operating conditions.
①
Warming up ON/OFF
(Operation starts 5 to 60 minutes
earlier in order to warm up the room
temperature closed to the set temp
at the set start time of operation.)
②
Operation mode …
☞
8
③
Set temp …
☞
9
④
Fan speed …
☞
1 0
■Set the operation mode before setting the
set temperature.
8
Tap a desired operation mode.
When the
No setting
button is
tapped, it operates with the same
operation mode at the last action. (
☞
7 )
Cooling
Weekly timer
Set Back
Set temp
Select the item to change.
Details
Previous
Warming up
Cooling
Weekly timer
No setting Back
Please select operation mode.
Fan
Heating
Dry
Auto
13
Display the setting contents check
screen. To register the setting, tap
the
Enter button.
-2( gnittes puorg fo esac nI )1( ①
Weekdays, 2-②Sat/Sun, 2-③All
days setting), move to the group
setting screen. (☞1 3 )
gnittes laudividni eht fo esac nI )2(
(2-④Each day setting), save the
setting and move to a day of the
week selection screen. (
☞
3 )
14
Display the group setting
acknowledge screen. Tap the
Yes
button and save the setting.
The display changes to a day of the
week setting check screen after
saving. (☞3 )
retfa gnittes eht gnikam nehW
changing a day of the week, repeat
the setting from the step 3 .
Weekly timer
Yes
Back
Do you want to apply group setting?
'22 • PAC-SM-412
-
109
-