EasyManua.ls Logo

Mitsubishi FDUA125VNPWVH - Page 43

Mitsubishi FDUA125VNPWVH
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
'22 • PAC-SM-412
-
42
-
This PCB is a general PCB. Replace the PCB according to this instruction.
i)
Replace the PCB
Unscrew terminal of the wiring(yellow/green) connected to Terminal block (CNWO) from the box.
Replace the PCB only after all the wirings connected to the connector are removed.
Fix the board such that it will not pinch any of the wires.
Reconnect the wirings to the PCB. Wiring connector color should match with the color of connector of the PCB.
Screw back the terminal of wiring, that was removed in .
ii)
Power PCB
Parts mounting are different by the kind of
PCB
.
Models FDE71VH
Part number
CNM1(White)
Fan motor
CNW1(White)
Control PCB
CNW3(White)
Terminal block
CNW0(White)
Terminal block
2) Power PCB
This PCB is a general PCB. Replace the PCB according to this instruction.
i)Replace the PCB
󲼓 Unscrew terminal(Arrow A) of the "E2" wiring(yellow/green) that is connected to PCB.
󲼔 Replace the PCB only after all the wirings connected to the connector are removed.
󲼕 Fix the board such that it will not
p
inch an
y
of the wires.
󲼖 Reconnect the wirings to the PCB. Wiring connector color should match with the color of connector of the PCB.
󲼗 Screw back the terminal(Arrow A) of the "E2" wiring, that was removed in 1.
ii)Power PCB
Parts mounting are different by the kind of PCB.
Part number
CNW3(White󲷈
Terminal block
CNM1(White󲷈
Fan motor1
CNW1(White󲷈
Control PCB
CNW0󲷇White󲷈
Terminal block
CNM2(Black󲷈
Fan motor2
CNWR(White󲷈
Reactor
• Models FDU125VH, FDUA125VH
PSC012D021
B
• Model FDE125VH
This PCB is a general PCB. Replace the PCB according to this instruction.
i)
Replace the PCB
Unscrew terminal of the wiring(yellow/green) connected to Terminal block (CNWO) from the box.
Replace the PCB only after all the wirings connected to the connector are removed.
Fix the board such that it will not pinch any of the wires.
Reconnect the wirings to the PCB. Wiring connector color should match with the color of connector of the PCB.
Screw back the terminal of wiring, that was removed in .
ii)
Power PCB
Parts mounting are different by the kind of
PCB.
Models FDE71VH
Part number
CNM1(White)
Fan motor
CNW1(White)
Control PCB
CNW3(White)
Terminal block
CNW0(White)
Terminal block
PSB012D992
C

Table of Contents

Related product manuals