─ 28 ─
8 Tighten the screws (four PTT screws 5 × 10, indi-
cated by ) to attach the cover (left).
9 Attach the H. elem. cover (inside).
Cover (left)
0 Tighten the screws (Seven PTT screws 5 x 10, indi-
cated by ) to attach the H. elem. cover.
H. elem. cover (
inside
)
When reassembling
Reassemble the unit in the reverse order of disas-
sembly.
After reassembly, always make a test run to be sure
that the unit operates properly.
H. elem. cover
To Next Page
Loading...
