6-13
• Illumination of amber lamp
The amber lamp illuminates if the exhaust gas con-
trol system has some abnormality and its function
deteriorates. The engine output may be limited
depending on the location of the fault. If the lamp is
lit, have your vehicle inspected at an authorized
dealer in the earliest opportunity.
NOTE:
The warning lamp will light up when the starter
switch is turned to the “ON” position and the engine
is not running. It goes out after the engine is started
if there are no problems.
8 Vehicle control warning lamp
The vehicle control warning lamp lights up when
problems occur in the vehicle’s electrical control
system. If it lights up, pull off the road as soon as it
is safe to do so.
Place the starter switch to the “ACC” or “LOCK”
position for more than five seconds, then restart the
engine. If the warning lamp goes out, there are no
problems. If it remains on, have your vehicle
inspected by an authorized dealer as soon as possi-
ble.
NOTE:
The warning lamp will light up when the starter
switch is turned to the “ON” position and the engine
is not running. If it goes out after a few seconds,
there are no problems.
Z11859
FKFM.book Page 13 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
