12-73
3. Mount the wheel so that the wheel bolts line up
with the bolt holes in the disc wheel. Then,
tighten the wheel nuts to hold the disc wheel in
position. The spherical end of the wheel nut
should be directed toward the disc wheel.
NOTE:
• The wheel bolts and nuts on the right-hand
wheels have right-hand threads, and those on
the left-hand wheels have left-hand threads.
The bolts and nuts have stamped marks for
easy identification; an “R” mark for right-hand
wheels and an “L” mark for left-hand wheels.
• Wheel nuts , wheel bolts , outer wheel nuts
and inner wheel nuts are marked with “ST”
or “S·A”. The “ST” mark indicates that these fas-
teners are for steel wheels and the “S·A” mark
that they are for both steel and aluminum
wheels.
WARNING
When mounting the wheel, take care not to
damage the threads of the wheel bolts and
inner wheel nuts.
Z00298
Z17802
Left wheel Right wheel
Rear wheels
Left wheel
Right wheel
Front wheels
FKFM.book Page 73 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
