Mitsubishi Fuso FK 2010 - Page 287

15-10 Maintenance schedule
CAB AND FRAME
Looseness and dam-
age of chassis and
body
••I••
• Check frame, crossmembers
and other parts for cracks and
damage and check for loose
rivets.
• Also, check for body damage
and loose mounting bolts.
–
Heater and defroster
operation
••I••
Check operation and installa-
tion of defroster.
–
Condition of rearview
mirrors and reflectors
I••••
Check reflecting condition,
stains and damage.
12-14
Door lock function • • I • •
Check door lock mechanism for
proper functioning.
–
Seat belt mounting con-
dition
••I••
Check seat belt for damage,
buckle and retracting function
and mounting condition.
–
ELECTRICAL SYSTEM
Looseness and dam-
age of electrical wiring
and connections
••I••
Check wiring, connectors and
battery terminals for looseness
and corrosion.
–
Battery electrolyte level
and specific gravity
••
Every
20,000 km/
12,000 miles
• Check electrolyte level.
• Measure electrolyte specific
gravity with hydrometer.
12-80
Operation and damage
of lighting system and
turn signal lamps
I•I••
Check operation, damage and
installation of an lighting units.
Also check turn signal lamps
operated by turn signal switch.
12-13
Operation of horn I • I • •
Check operation, damage and
mounting condition.
12-15
Operation and fluid
level of windshield
wiper and washer
I•I••
Check operation, damage and
mounting condition.
Check fluid level in washer tank.
5-27,
12-13
Gauge and warning/
indicator lamp function
I•I••
Check function of gauges and
warning/indicator lamps.
12-14
Switch function • • • • I
Check operation, damage and
installation of every switch.
–
Battery I • • • • Check the battery fluid level. 12-83
Item
Time of inspection and
maintenance
Working procedures
Ref.
page
Pre-operational checks New vehicle at 4,000 km/ 2,500 miles
Inspection
interval
Every 10,000 km/ 6,000 miles Every 30,000 km/ 18,000 miles *1 Every 60,000 km/ 36,000 miles *2
FKFM.book Page 10 Wednesday, January 28, 2009 9:21 AM