3-10 Opening and closing
2. Remove the battery holder from the cover.
3. Put a new battery in the battery holder with the
“+” mark on the battery facing up. Then install
the battery holder in the cover with the “+” mark
on the battery facing against the “+” mark on the
cover.
4. Fit the cover on the remote control switch and
fasten it with the screw.
5. Operate the remote control switch and check
that it works correctly.
Z17228
Z17229
FKFM.book Page 10 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
