Chapter1:GettingtoKnowYourVCR OverviewoftheRemoteControl(cont.)
21
®
®
©
®
24
-- 25
-- 26
-- 27
-- 28
--29
display button (DISPLAY)
Press to display the following information
on the television:
• how much time has elapsed on the
current tape,
• the channel number you are watching,
• the source that is supplying the VCR
with a signal,
• the present time,
• whether the VCR is stopped, playing,
or recording, and
• how much time is left on the tape.
This button can also l_e used to turn on
and off the "Child Lock" feature.
quick program and VCR Plus+ button
(QUICK PROGRAM/VCR Plus+)
*This button allows you to program your
VCR more quickly and easily. When you
press this button, you will immediately
see the "Program to record" screen, where
you can enter a VCR PlusCode number or
begin programming your VCR to record.
fast forward and fast forward search
button (FF)
Press this button to fast forward a tape or
to fast forward search.
play button (PLAY)
Press this button to play a tape.
10
@
:
6)
6)
@
@
@
pause button (PAUSE)
Press this button to pause a tape when
recording, or to freeze a frame when
viewing a tape.
shuttle ring
When a tape is playing, turn this nLng to
adjust 1;he playback speed. When using the
menus, turn this ring to enter or cancel
selections. When viewing TV channels
through the VCR, use this ring to add
channels to, or delete channels from, the
super quick view memory.
mode buttons (VC,R-A, VCR-B)
With these buttons, you can operate two
Mitsubishi VCRs witk one remote. (See
page 21.)
number buttons
Use these buttons to select television
stations and to enter VCR PlusCode
numbers.
audio function button (AUDIO}
Press this button to adjust the VCR's
audio functions.
picture-in-picture buttons (PIP
SOURCE, PIP)
Use these buttons to control the picture-in-
picture functions of a Mitsubishi TV.
one-touch recording and off-timer
(OTR .,and OFF-T)
This button has two fhnctions:
• If the remote isset up to operate the
VCR and the VCR is stopped, use this
button to begin recording and to set; a
length of time afte:r which the VCR will
stop recording.
• If the remote is set up to operate a
Mitsubishi TV, use this button to set a
length of time af_e:r which the _IV will
turn off. (See your Mitsubishi TV
owner's guide for more details.)
VCRfrV button (VC R/TV)
Press this button to s_itch between the
VCR's tuner and the '['v's tuner. When you
select '_VCR," you change channels on the
VCR; when you select "TV," you change
channels on the TV.
To Next Page
Loading...
Need help?
General
