EasyManuals Logo

Mitsubishi Lancer Evolution VI Installation Manual

Mitsubishi Lancer Evolution VI
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
3. Remove two screws from inside t
center console storage com
he
partment.
4. Lift up on the rear section of the
center console and unclip it from the
front section.
5. Remove plastic screw from the
driver’s side of the center console
(near the gas pedal). Remove the
plastic cover and the pop rivet b
it. Then remove the two screws at
rear of the console (were hidden b
the rearward part of the center consol
that was removed).
eneath
the
y
e
6. Unclip plastic connector at the rear
of the console. Remove entire center
console.

Other manuals for Mitsubishi Lancer Evolution VI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi Lancer Evolution VI and is the answer not in the manual?

Mitsubishi Lancer Evolution VI Specifications

General IconGeneral
Transmission5-speed manual
DrivetrainAll-Wheel Drive
Engine Code4G63
Compression Ratio8.8:1
Fuel SystemMulti-point Fuel Injection
Front BrakesVentilated discs
Rear BrakesVentilated discs
Wheelbase2510 mm
Length4350 mm
Width1770 mm
Height1415 mm
Engine TypeInline 4
Horsepower276 hp
Torque275 lb-ft @ 3000 rpm
Top Speed155 mph (electronically limited)
Displacement1997 cc
Bore x Stroke85.0 mm x 88.0 mm
Maximum Power276 hp @ 6500 rpm
Maximum Torque373 N⋅m (275 lb⋅ft) @ 3000 rpm
Front SuspensionMacPherson strut
Rear SuspensionMulti-link
Curb Weight1360 kg
Fuel Tank Capacity50 L

Related product manuals