EasyManua.ls Logo

Mitsubishi Lancer Evolution VIII MR - Engine (4 G6) Overview and Specifications; General Engine Description; Major Engine Specifications

Mitsubishi Lancer Evolution VIII MR
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-1
ENGINE (4G6) – GENERAL
SECTION 1
ENGINE (4G6)
CONTENTS
General ....................................................1-1
1. Major Specifications....................................1-1
2. Engine Performance Curve.........................1-2
Base Engine (6 M/T) ...............................1-2
1. Cylinder head gasket...................................1-2
2. Pistons..........................................................1-3
3. Piston rings (2nd) ........................................1-3
4. Oil rings ........................................................1-4
5. Counterbalance shaft .................................1-4
6. Camshaft.......................................................1-5
Intake / Exhaust System (6 M/T)............1-6
1. Exhaust system ...........................................1-6
Control system (6 M/T)...........................1-8
1. Supercharging pressure control..............1-10
General
The 4G63-T/C engine fitted in the Lancer Evolution VIII MR is basically the same as the 4G63-T/C engine used in the Lancer
Evolution VIII.
The basic structure is the same in both the 6M/T (6-speed) and 5M/T (5-speed) versions, but the following improvements have
been made to the 6M/T version, in order to achieve higher performance.
Adoption of 5-ply cylinder head gasket
Addition of V-shaped groove in piston , and modified shape in cooling channel
Reduced oil consumption by increasing tension in piston rings and reducing end-to-end gap
Extra durability and reduced oil consumption by using new treatment on outer surface of oil ring side rail, and altering
thickness
Lighter counterbalance shaft
Increased output at high engine speeds by modifying intake cams
Major Specifications
Item 6 M/T 5M/T
Total Displacement cc 1997
Combustion chamber Pentroof type
Bore x stroke (mm) 85.0 x 88.0
Compression ratio 8.8
Camshaft arrangement DOHC-4 valve
Fuel Premium unleaded
Max. output (kW/rpm) 206/6500
Max. torque (Nm/rpm) 400/3500 392/3500
Fuel system Electronic controlled multipoint fuel injection
Ignition system Electronic controlled two-coil
Lash adjuster Equipped

Related product manuals