Mitsubishi MBG1200 - User Manual

Mitsubishi MBG1200

16 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Operator’s Manual

MBG1200

MBG2902

MBG3500

MBG5500

MBG6500/X

MBG7000/X

IMPORTANT – Please make certain that

persons who are to use this equipment

thoroughly read and understand these

instructions and any additional instructions

provided prior to operation.

GASOLINE GENERATOR

NOTE:

THERE IS A PERMANENT CONDUCTOR

BETWEEN THE GENERATOR (STATOR

WINDING) AND THE FRAME.

NOTE:

No refund or exchange once gasoline is placed

into the fuel tank.Warranty registration must be

complete within 30 days of purchase with proof

of purchase.

Table of Contents

Questions and Answers

A
Andrea WagnerAug 6, 2025
How to fix a Mitsubishi MBG1200 that won't start?
- L
  Lindsey AllenAug 6, 2025
  If your Mitsubishi Portable Generator isn't starting, runs with low output, or runs erratically, there are several potential solutions. First, ensure sufficient compression by properly tightening the plug and bolt, or consider replacing the gasket. If compression is sufficient, try these steps: * Pull the rope sharply. * Clean the fuel tank and fuel line. * Refill the tank with fuel and open the valve. * Remove carbon or wipe the spark plug, or replace it. * Ensure the proper grade of fuel is used and add sufficient oil as specified. * Also, make sure you haven’t plugged in too many devices and check the fan.

Mitsubishi MBG1200 Specifications

General

Brand	Mitsubishi
Model	MBG1200
Category	Portable Generator
Language	English

Related product manuals

Preview: Mitsubishi MGC1101

Mitsubishi MGC1101

Preview: Mitsubishi MGE6700Z

Mitsubishi MGE6700Z