5
A - CRUISE CONTROL ON/OFF switch
Used to turn on and off the cruise
control.
B - SET - switch
Used to reduce the set speed and
to set the desired speed.
C - RES + switch
Used to increase the set speed and
to return to the original set speed.
D - CANCEL switch
Used to deactivate the set speed
driving.
1. Temperature Indicator Lamp
Illuminated Green
• When the temperature indicator lamp
is illuminated Green this indicates
the engine has not reached normal
operating temperature.
NOTE: This will result in cooler heater
outlet temperatures until engine reaches
normal operating temperatures.
OWN THE ROAD
Cruise Control (if equipped) Temperature Indicator Lamp Operation
A
B
C
D
Multi Information Display Switch Each time you lightly press the multi-information display switch (A), the display switches in the following order.
1- Odometer
2- Trip odometer A
3- Trip odometer B
4- Instrument panel light dimmer control
5- Driving range display
6- Average fuel consumption display
7- Service reminder (distance)
8- Service reminder (month)
NOTE
• When the ignition switch or the operation mode is in OFF, the driving range display and average fuel
consumption display are not displayed.
• While driving, the service reminder is not displayed even if you operate the multi-information display switch.
NOTE:
When operating the cruise control switches, press the cruise
control switches correctly. The set speed driving may be
deactivated automatically if two or more switches of the cruise
control are pressed at the same time.
2. Temperature Indicator Lamp Off
• When the temperature indicator lamp is Off this indicates the engine is
at normal operating temperature.
3. Temperature Indicator Lamp Illuminated Red
• When the temperature indicator is illuminated Red this indicates the
engine is overheating.
NOTE: If the engine is overheating, find a safe place to park the vehicle, then
shut the engine off and call Roadside Assistance as continued driving could
cause the engine to fail.
To Next Page
Loading...
Need help?
General
