Air cleaning fi lter
Back side of air fi lter
If the air cleaning fi lter is clogged, it may lower the unit’s
capacity or cause condensation at the air outlet:
• The air cleaning fi lter is disposable.
• If the color of the fi lter turns to dark brown, replace the fi lter at
once.
Every 4 months:
•
Replace it with a new air cleaning
fi lter for best performance.
• Parts Number MAC-2801FT
(no frame)
• Parts Number MAC-2802FT
(with frame)
Instructions:
CLEANING
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or fl ames to dry.
• Do not use water hotter than 50°C.
Air fi lter (Nano platinum fi lter)
• Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• Dry it well in shade before installing it.
What is “Nano platinum fi lter”?
Nano platinum is a ceramic particle that includes a platinum nanoparti-
cle. The particles are incorporated into the fi lter material, which results
in providing semi-permanent antibacterial and deodorizing characteris-
tics for the fi lter. Nano platinum surpasses the catechin (a biofl avonoid
that is found in green tea) in performance. Nano platinum fi lter uses this
compound not only to improve air quality but also to eliminate bacteria
and viruses. This air fi lter has a semi-permanent lasting effect even
after washing it with water.
Important
• Clean the fi lters regularly for best performance and to
reduce power consumption.
• Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air fi lters
every 2 weeks.
Pull to remove from the air fi lter
1. Lift the front panel until a “click” is heard.
2. Hold the hinges and pull to remove as shown in the illustration above.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade.
3. Install the front panel by following the removal
procedure in reverse. Close the front panel securely
and press the positions indicated by the arrows.
Front panel
Hole
Hinge
To Next Page
Loading...
