10
Starting the Plug-In Hybrid Electric Vehicle system
Step 1 Ensure that the charging cable is disconnected from
the vehicle.
Step 2 Ensure that the parking brake is applied.
Step 3 Depress the brake pedal completely.
Step 4 Press the power switch completely.
Do not release the brake pedal until the system has
successfully started.
Step 5 Ensure that the indicator is illuminated.
Do not operate the selector lever until the
indicator is illuminated. If the selector lever is
operated while the indicator is still blinking, the
system will not start.
Is something really wrong?
If the Plug-In Hybrid Electric Vehicle system cannot be started, remove your foot from the brake pedal, return the power
switch to OFF. Wait for more than 10 seconds and then repeat the startup steps 1 to 5.
If position or cannot be selected (display not changing to or ) using the selector lever when the indicator is
illuminated, the brake pedal may not be depressed completely. Depress the brake pedal completely and then repeat the
start-off steps 1 to 4 before selecting or .
If the 12v auxiliary battery is flat the vehicle cannot be started. Refer to the owners manual on page 9-2 for the jump
starting procedure as it is unique for PHEV system.
Electric Vehicle System / Selector level operation
STEP 5
STEP 3
STEP 4
CAUTION: Do not use your Plug-In Hybrid to jump start another vehicle.
To Next Page
Loading...
Need help?
General
