Mitsubishi P66E User Manual

* TYPE CF EQUIPMENT esi
Class | or I| EQUIPMENT or EQUIPMENT
“with an INTERNAL ELECTRICAL POW-.
ER SOURCE, providing a. high degree of
protection against electric shock particu-
larly regarding allowable LEAKAGE CUR-
RENTS; . and having».an-.F-TYPE ISO-
LATED (FLOATING) APPLIED PART.
TYPE CF EQUIPMENT is primarily intended
for DIRECT CARDIAC APPLICATION. :
Rear
Panel
Potential equalization terminal
This is used to equalize the potential of the
equipment connected to this unit.
In medical rooms, when CF-type equipment”
are connected, it is necessary to equalize
the potential of both units. 8
For details, refer to the installation instruc-
tion of the equipment to be connected.
@
MODE
2
switch
Selects a special function.
MODE 1 switch
VIDEO IN connector
(BNC
type)
Video
signal
input
[eo
|
VIDEO
OUT
connector
(BNC
type)
Video
signal
output
(Monitor
output)
aioe
AFC
control
Adjust
AFC
ie:
oof
jelele
Horizontal
position
control
|
Adjust
the
horizontal
position
of
a
picture.
Remote
control
terminal
Terminal
to
connect
the
remote
controller
Potential
equalization
Makes
the
connected
equipment
potential
40
terminal
equal.
Connect
the
power
cord
to
this
terminal.
9-10
eee

Mitsubishi P66E Specifications

General

Brand	Mitsubishi
Model	P66E
Category	Printer
Language	English