Mitsubishi P66E - When setting the paper, observe the following precautions to prevent paper jam; CAUTION

m When setting the paper, observe the ene
precautions to prevent paper jam.
- Do not use defective paper.
@ Do not use the bent or wrinkled
paper.
When the paper is fed out skewed
from the print exit, adjust the paper
position so that it is fed out straight.
CAUTION
e Keep the high-density paper away from fingerprint, dust or moisture when storing it.
® Do not touch the rubber roller. Do not stain or damage the roller surface.
e Do not touch your hand to the thermal head (located behind the cutter).
The thermal head is heated to high temperature.
e Do not touch the cutter blade.
@ Do not switch the lever to the “PRINT” position without loading paper.