© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
107 (244)107 (244)
PBV20N2 PBV20N2 Service Service ManualManual
3.3. Disconnect the motor Disconnect the motor connectors.connectors.
4.4. Disconnect the motor’s powerDisconnect the motor’s power
cables.cables.
5.5. Remove the two screws from theRemove the two screws from the
cable mounting bracket.cable mounting bracket.
6.6. Lift the truck up and support it properly to prevent it from falling. See the correctLift the truck up and support it properly to prevent it from falling. See the correct
lifting points in the sectionlifting points in the section5.15.1 of this manual.of this manual.
7.7. While supporting the motor from theWhile supporting the motor from the
traction wheel, remove the sixtraction wheel, remove the six
screws from the motor bed.screws from the motor bed.
8.8. Drop the drive unit through theDrop the drive unit through the
motor bed.motor bed.
8.3.2 8.3.2 Disassembly Disassembly of of the the drive drive unitunit
1.1. Remove the screws attaching theRemove the screws attaching the
magnetic brake to the traction motor.magnetic brake to the traction motor.
2.2. Remove the magnetic brake.Remove the magnetic brake.
3.3. Remove the limiter from the tractionRemove the limiter from the traction
motor.motor.
To Next Page
Loading...
