© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
115 (244)115 (244)
PBV20N2 PBV20N2 Service Service ManualManual
8.4.1 8.4.1 Solenoid Solenoid valvevalve
Figure 66. Solenoid valve overviewFigure 66. Solenoid valve overview
Solenoid valve is an electrically controlled hydraulic valve that has two main Solenoid valve is an electrically controlled hydraulic valve that has two main parts: aparts: a
solenoid (coil) and a solenoid (coil) and a valve. The solenoid converts electrical energy into valve. The solenoid converts electrical energy into mechanicalmechanical
energy which, in turn, opens or energy which, in turn, opens or closes the valve mechanically. This basic ON/OFFcloses the valve mechanically. This basic ON/OFF
function is used to control the oil flow to the cylinders.function is used to control the oil flow to the cylinders.
TypeType
SolenoidSolenoid
Contact ratingContact rating
24 Vdc / 22 W24 Vdc / 22 W
Electrical wiringElectrical wiring
Quick connect terminals 6.3 x 0.8 mmQuick connect terminals 6.3 x 0.8 mm
The basic solenoid test is to measure the ohms between the solenoid terminals XY1/A1The basic solenoid test is to measure the ohms between the solenoid terminals XY1/A1
and XY1/A2. The value should be ~27and XY1/A2. The value should be ~27 Ω.Ω.
To Next Page
Loading...
