© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
139 (244)139 (244)
PBV20N2 PBV20N2 Service Service ManualManual
5.5. Attach the hydAttach the hydraulic oil tank to raulic oil tank to thethe
pump motor with the four bolts.pump motor with the four bolts.
When assembling it, rotate the tankWhen assembling it, rotate the tank
so that the filling hole is placed asso that the filling hole is placed as
shown in the figure.shown in the figure.
10.510.5 Replacing the hydraulic cylinderReplacing the hydraulic cylinder
CAUTIONCAUTION
Attach caps to the cylinder connectors to protect the Attach caps to the cylinder connectors to protect the threads of the connectors and tothreads of the connectors and to
prevent oil from flowing out of the prevent oil from flowing out of the cylinder when it is removed.cylinder when it is removed.
Figure 84. Hydraulic cylinder overviewFigure 84. Hydraulic cylinder overview
1.1. Hydraulic cylinderHydraulic cylinder
2.2.
Hydraulic hoseHydraulic hose
3.3. Hydraulic hose connectorHydraulic hose connector
4.4. ShaftShaft
5.5.
Guide bracketGuide bracket
6.6. Cylinder slotCylinder slot
To Next Page
Loading...
