© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
187 (244)187 (244)
PBV20N2 PBV20N2 Service Service ManualManual
3.3. Slide the tool holder into theSlide the tool holder into the
operator-side groove in theoperator-side groove in the
mounting bracket.mounting bracket.
4.4. Screw the cover plates to Screw the cover plates to the sidesthe sides
of the mounting bracket.of the mounting bracket.
15.3.1.5 Installation of the working lights15.3.1.5 Installation of the working lights
CAUTIONCAUTION
Always use the correct schematic diagram for the Always use the correct schematic diagram for the specific model you are servicing. Thespecific model you are servicing. The
latest schematic diagrams are available from the manufacturer’s Web site.latest schematic diagrams are available from the manufacturer’s Web site.
1.1. Attach the workinAttach the working lights’ moug lights’ mountingnting
bracket to the accessory rack.bracket to the accessory rack.
2.2. Install and tighten the screws andInstall and tighten the screws and
nuts attaching the mounting bracketnuts attaching the mounting bracket
to the accessory rack.to the accessory rack.
3.3. Install the working light powerInstall the working light power
button.button.
To Next Page
Loading...
