© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
24 (244)24 (244)
PBV20N2 PBV20N2 Service Service ManualManual
4.3.4.2 4.3.4.2 Riding Riding modemode
Figure 9. Operator’s platform and side guards in the riding Figure 9. Operator’s platform and side guards in the riding modemode
To drive the truck To drive the truck in the riding mode, lower the operator’s platform to the in the riding mode, lower the operator’s platform to the horizontalhorizontal
position and unfold the side guards. The side guards keep the operator within theposition and unfold the side guards. The side guards keep the operator within the
outlines of the truck and outlines of the truck and prevent the operator from losing balance.prevent the operator from losing balance.
To drive the truck in the riding mode, step on the platform and keep both hands on theTo drive the truck in the riding mode, step on the platform and keep both hands on the
tiller arm. When you step tiller arm. When you step off the platform, it stays off the platform, it stays in the horizontal positionin the horizontal position
automatically.automatically.
NOTE: The maximum driving speed in the riding mode is 9 kNOTE: The maximum driving speed in the riding mode is 9 km/h.m/h.
It is It is also possible to drive the truck also possible to drive the truck on the platform without unfolding the side guards.on the platform without unfolding the side guards.
In this case, In this case, the maximum driving speed has been limited to 6 km/h.the maximum driving speed has been limited to 6 km/h.
There is also an optional 12 km/h speed mode available, where the top speed isThere is also an optional 12 km/h speed mode available, where the top speed is
adjusted according to the load.adjusted according to the load.
To Next Page
Loading...
