© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
68 (244)68 (244)
PBV20N2 PBV20N2 Service Service ManualManual
3.3. Remove the brake wires from theRemove the brake wires from the
connector using the extraction toolconnector using the extraction tool
(360058).(360058).
4.4. Remove the bolts attaching the tillerRemove the bolts attaching the tiller
arm fastener to the magnetic brake.arm fastener to the magnetic brake.
5.5. Remove the tiller arm fastener andRemove the tiller arm fastener and
the tiller arm.the tiller arm.
During the installation of the tiller arm, tighten the bolts of the tiller arm fastener first byDuring the installation of the tiller arm, tighten the bolts of the tiller arm fastener first by
hand to make sure they fit the threads correctly. After that, cross-tighten the bolts with ahand to make sure they fit the threads correctly. After that, cross-tighten the bolts with a
power tool, making sure that the fastener is power tool, making sure that the fastener is aligned correctly.aligned correctly.
To Next Page
Loading...
