Mitsubishi PBV20N2 - Page 91

( )( )


© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
91 (244)91 (244)

PBV20N2 PBV20N2 Service Service ManualManual
8.1.4 8.1.4 Removing Removing the the acceleratoraccelerator
NOTE: Record the places of the wire connections before disassembly.NOTE: Record the places of the wire connections before disassembly.
Keep the accelerator connector because the new accelerator is delivered without aKeep the accelerator connector because the new accelerator is delivered without a
connector.connector.

Figure 53. Accelerator overviewFigure 53. Accelerator overview
1.1. Rubber handleRubber handle
2.2. Accelerator knobAccelerator knob
3.3. Safety buttonSafety button
4.4. Microswitch bracketMicroswitch bracket
5.5. Accelerator connectorAccelerator connector
6.6. Mounting bracketMounting bracket
7.7. AcceleratorAccelerator
1.1. Remove the tiller head. For instructions, see sectionRemove the tiller head. For instructions, see section8.1.18.1.1 above.above.
2.2. Remove the safety button. For instructions, see sectionRemove the safety button. For instructions, see section8.1.38.1.3 above.above.
https://www.forkliftpdfmanuals.com/