Mitsubishi Q02HCPU Manual

11
Mitsubishi Electric Melsec-Q Ethernet (UDP) Driver
8 Device Address Configuration
To set up a PLC variable in the Variable List, use the Device Address Keypad from the variable
properties.
See Section 3 – Supported Device Addresses.
For information on how to display the Device Address Keypad, see the
online help.
Device
Lists the PLC’s discrete and word device types.
Address
Enter the device address for the PLC variable. The keypad ensures that you enter the correct
format for bit and word devices.

Mitsubishi Q02HCPU Specifications

General

Brand	Mitsubishi
Model	Q02HCPU
Category	Controller
Language	English