7
COMMUNICATION USING BUILT-IN ETHERNET
PORTS OF CPU MODULE
7.6 File Transfer Function (FTP)
7 - 41
1
Overview
2
Performance
Specification
3
Sequence Program
Configuration and
Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files
Handled by CPU Module
6
Functions
7
Communication using
built-in Ethernet ports of
CPU module
8
Communication with
Intelligent Function
Module
status
[Function]
Displays the operation information of the Built-in Ethernet port QCPU.
This command checks the Built-in Ethernet port QCPU operation
information when executing file transfer to the Built-in Ethernet port QCPU.
[Specification format] quote status
One of the following is displayed as the execution result upon normal
completion.
• When the Built-in Ethernet port QCPU is in the RUN status: "RUN"
• When the Built-in Ethernet port QCPU is in the STOP status: "STOP"
• When the Built-in Ethernet port QCPU is in the PAUSE status: "PAUSE"
stop
[Function]
Changes the Built-in Ethernet port QCPU status to STOP. (Executes
remote STOP.)
[Specification format] quote stop
The following message is displayed as the execution result upon normal
completion.
Displayed message: 200 Command successful
[Note]
Write files to the program memory after the Built-in Ethernet port QCPU
status is changed to STOP using this command.
pm-write
[Function]
Transfers files in the program cache memory to the program memory.
[Specification format] quote pm-write
The following message is displayed as the execution result upon normal
completion.
Displayed message: 200 Command successful
[Note]
Write files after the Built-in Ethernet port QCPU status is changed to STOP.
To Next Page
Loading...
Need help?
General
