-
124
-
Setting
＆
display item Description RC-EX3
RC-E5
4
Service & Maintenance
[Service password]
IU address
Max 16 indoor units can be connected to one remote control, and all address No. of the connected indoor units can be displayed.
・
The indoor unit conforming to the address No. can be identified by selecting the address No. and tapping [Check] to
operate the indoor fan.
○
−
Next service date The [Next service date] can be registered.
・
The [Next service date] and [Company information] is displayed on the message screen.
○
−
−
−
−
−
Operation data The [Operation data] for indoor unit and outdoor unit can be displayed. ○
○
Error display
○
△
Error history The error history can be displayed.
Display anomaly data The operation data just before the latest error stop can be displayed.
Erase anomaly data Anomaly operation data can be erased.
Reset periodical check The timer for the periodical check can be reset.
Saving IU settings
The I/U settings memorized in the indoor PCB connected to the remote control can be saved in the memory of the remote control.
○
Special settings [Erase IU address] [CPU reset] [Restore of default setting] [Touch panel calibration] ○
△
Indoor unit capacity display Address No. and capacities of indoor units connected to the remote control are displayed. ○
8.Contact company Shows registered [Contact company] and [Contact phone].
9.Inspection
Confirmation of Inspection This is displayed when any error occurs. ○
−
10.PC connection
USB connection Weekly timer setting and etc., can be set from PC. ○
◆
Listed items may not function depending on the specifications of indoor and outdoor units which are combined.
*1 It supports only following functions.
Operation output / Heating output / Compressor ON output / Inspection (Error) output / Cooling output / Fan operation output 1 / Fan operation output 2 / Fan operation output 3 / Defrost/oil return output
○
To Next Page
Loading...
Need help?
General
