To Next PageTo Next PageWhy is my Mitsubishi Air Conditioner not cooling or heating properly?
There might be several reasons why your Mitsubishi Air Conditioner isn't cooling or heating well. First, check if you've set the thermostat to a suitable temperature. Also, ensure the air filter is clean and not clogged. Finally, make sure all doors and windows are closed to prevent outside air from affecting the unit's performance.
What to do if my Mitsubishi SRK50HE-S1 Air Conditioner does not work at all?
If your Mitsubishi Air Conditioner isn't working, check the following: * Ensure the power switch is turned on. * Verify the timer isn't set to the "ON" position. * Check for a power failure or a blown fuse.
Why is my Mitsubishi Air Conditioner not cooling well?
If your Mitsubishi Air Conditioner isn't cooling effectively, consider these factors: Check if direct sunlight is entering the room, ensure there isn't a heat source present, and verify that the room isn't overcrowded with too many people.
What to do if my Mitsubishi Air Conditioner won't blow air when starting HEATING?
If your Mitsubishi Air Conditioner doesn't blow air when starting the heating operation and the RUN light blinks slowly (1.5 sec ON, 0.5 sec OFF), it's likely because the airflow has stopped to prevent cold air from blowing out until the indoor heat exchanger warms up. Please wait for 2 to 5 minutes.
Why Mitsubishi SRK50HE-S1 Air Conditioner air is not blown out for 5-10 min during HEATING?
When the outdoor temperature is low and humidity is high, your Mitsubishi Air Conditioner may automatically defrost. Please wait, as water or steam might escape from the outdoor unit during this process.
Why air is not blown out when starting the DRY operation on my Mitsubishi SRK50HE-S1?
The indoor fan may stop to prevent re-evaporation of dehumidified moisture and to save energy.
Why does my Mitsubishi Air Conditioner have a slight smell?
The air blown out during operation may smell due to tobacco or cosmetics sticking to the unit.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 10 kg |
| Type | Split System |
General warnings and guidelines for installing the air conditioner safely.
General warnings and guidelines for operating the air conditioner safely.
Guidelines for safely moving or repairing the air conditioner.
Explains HEAT, COOL, DRY, FAN, and AUTO modes.
Covers Amenity facility, TIMER, HI POWER, ECONOMY, and Airflow adjustment.
Identifies parts of the indoor unit and their functions.
Identifies parts of the outdoor unit.
Lists and describes the accessories provided with the unit.
Explains the meaning of the indicator lights on the unit.
Details opening, closing, and removing the air inlet panel.
Details removal and installation of the air inlet top panel.
Details the buttons and functions on the remote control.
Explains the indicators displayed on the remote control.
Step-by-step guide to using the AUTO mode.
How to adjust temperature while in AUTO mode.
Step-by-step guide for common operation modes.
Details about High Power and Economy modes.
Explains adjusting vertical and horizontal airflow.
Details available fan speed options.
Procedure for setting the unit to stop automatically.
Procedure for setting the unit to start automatically.
How to set combined ON/OFF timers for daily schedules.
Procedure to set the current time for timer accuracy.
How to operate the unit manually without the remote.
Steps for replacing exhausted batteries in the remote.
Important precautions for handling the remote control.
What to do if the remote control stops working.
Tips for economical and comfortable use of the unit.
Actions to take before performing maintenance.
Cleaning and upkeep tasks during use.
Tasks for preparing the unit for off-season storage.
Tasks for preparing the unit for the start of the season.
Guides on installing/replacing enzyme and deodorizing filters.
Covers correct installation, position, and noise.
Recommends professional checks after several years of use.
Checks for when the air conditioner does not operate at all.
Addresses problems with cooling or heating effectiveness.
Specific checks for when the unit is not cooling properly.
Important operational notes on restarts, air flow, and steam.
Situations requiring immediate dealer contact.
Defines the recommended operating ranges for cooling and heating.
Explains the automatic restart after a power interruption.
Details the mechanism and defrosting of the heat mode.
Maps indicator light flashes to trouble descriptions and causes.
