EN-26
NOTE
• Two hours later, the air-conditioner stops SELF CLEAN operation
automatically. To stop the air-conditioner immediately, press the ON/OFF
button.
• SELF CLEAN operation is not operated after HEAT, FAN, OFF TIMER,
SLEEP and ALLERGEN CLEAR operations have finished.
• The indoor unit fan runs for about two hours in SELF CLEAN operation.
• The RUN light illuminates during SELF CLEAN operation.
• Pressing the SLEEP button, ALLERGEN CLEAR button or NIGHT
SETBACK button during SELF CLEAN operation cancels the SELF
CLEAN operation and then the unit is set to SLEEP, ALLERGEN CLEAR
or NIGHT SETBACK operation.
• This is not a function for removing mold, germs or grime that have
already adhered to the unit.
■
SELF CLEAN operation should be run after AUTO, COOL and DRY operation to remove the moisture from inside of the indoor unit and
control the growth of mold and bacteria.
3 seconds
1 second
ON
OFF
SELF CLEAN operation
1
In order to active SELF CLEAN operation, press the
CLEAN switch with the tip of a ballpoint pen.
Every time the CLEAN switch is pressed, the display is switched in the
order of:
No display
(SELF CLEAN on) (SELF CLEAN off)
RLD012A019 _EN.indd 26RLD012A019 _EN.indd 26 5/28/2018 5:10:31 PM5/28/2018 5:10:31 PM
To Next Page
Loading...
Need help?
General
