10. MAINTENANCE OF THE MACHINE
The spots to
lubricate
Lubrication
cycle
Lubrication
method
Recommended
way oil and Grease
"No*
Parts
APOLLO
SHELL
MOBIL
A 2
Sliding parts
of head
Fill up
every day
Automatic
Lubricator
Daphne
mechanic
oil 52
Tell u s
oil 29
Vactra No.2
heavy
medium
1
Vertical feed
Screw
C
-1
Cross feed
Vee-way
0
Cross feed
Screw
E 2
Longitudinal
Slideway
every month
Clean slide
& Put New od
Bearing holder
for crossteed
every year
Clean holder
& regrease
DaphneDap
Coronex
grease
Alvania
grease 2
Mobil
grease 2
Cleaning and oiling of the lubricating parts are of the great importance
to keep the machine in good working order and to maintain the accuracy of the
machine. They are liable to get soiled easily by the particles of ground
works and grains removed from the grinding wheels. Attention should be paid
to keep the machine clean all the time.
Mitsui will not take a responsibility for the problem, caused by
wrong brand lubricants and wrong lubrication cycle.
A. LUBRICATIONS
The proper choice of lubricating oil and grease assures the high precision
and efficiency of the machine. Following are the recommended lubricants for
Mitsui Surface Grinders:
— 28 —
To Next Page
Loading...