Mitutoyo AT112 User Manual

11
Scale Unit
55
(2.17")
7.5 (.295")
42 (1.65")
20
(.79")
11 (.43")
7 (.28")
28 (1.10")
70 (2.76")
28 (1.10")21 (.83")
42 (1.65")
14
(.55")
28
(1.10")
20
(.79")
Ø16 (.63")
15 (.59")
L2
8
(.31")
L
3
Min. 0
Max. L
1
44(1.73")
13 (.51")
9.5
(.374")
24
(.94")
15 (.59")
35 (1.38")
7.5 (.295")
7.5 (.295")
10 (.39")
Min. 0
Max. L
0
21 (.83")
25 (.98")
Signal cable
connector,
swivel
angle: 260°
Mounting block
swivel angle: 360°
M6 (x2),
10mm deep
Ø7 through hole (x3), counterbored
Ø11mm x 6.5mm both sides
Ø7 through hole (x2), counterbored
Ø11mm x 6.5mm both sides
M6 nut (x2),
in T-groove
(8mm deep)
M6 nut (x2),
in T-groove
(8mm deep)
Signal cable,
Length: 3m (9.8 feet)
G: Machine guide
AT181, Plunger Type
Order No. and mounting dimensions mm (inch)
Order No. / Model No.
¬¬¬¬SUFlX¬FOR¬HIGH¬ACCURACY¬TYPE
Effective
range L
0
Travel
range L

Mount
interval L
2
Main spar
length L
3
Signal cable
length
Mass
kg (lbs.)
539-301 (-10) / AT181-100 (F)  ¬ v  ¬   v    ¬  v   ¬   v 3m (9.8 feet) ¬
539-302 (-10) / AT181-150 (F)    ¬  v     ¬    v    ¬     v     ¬     v  3m (9.8 feet)   ¬    
539-303 (-10) / AT181-200 (F)  ¬v ¬v ¬v ¬v 3m (9.8 feet)   ¬    
539-304 (-10) / AT181-250 (F)  ¬v  ¬ v ¬v  ¬v 3m (9.8 feet)   ¬    
539-305 (-10) / AT181-300 (F) ¬ v ¬ v ¬v ¬v 3m (9.8 feet)   ¬    
539-306 (-10) / AT181-350 (F) ¬v ¬v ¬v  ¬ v 3m (9.8 feet)   ¬    
539-307 (-10) / AT181-400 (F) ¬v ¬v ¬ v ¬  v 3m (9.8 feet) 2.9 (6.38)
539-308 (-10) / AT181-450 (F) ¬v ¬v ¬ v  ¬ v 3m (9.8 feet)   ¬    
539-309 (-10) / AT181-500 (F) ¬ v ¬ v ¬ v ¬ v 3m (9.8 feet) 3.3 (7.26)
539-310 (-10) / AT181-550 (F) ¬  v ¬  v ¬ v  ¬ v 3m (9.8 feet)   ¬    
539-311 (-10) / AT181-600 (F) ¬ v ¬ v ¬  v ¬v 3m (9.8 feet)   ¬    
Note) When selecting the size of a scale unit for your application, make sure that the maximum travel range of the scale unit (L

) is larger than the maximum travel range
of the machine. Also, take into consideration in selecting a size that the accuracy of the scale unit is guaranteed only within the range of the effective measuring
length (L
0
).
Extension cable
Order No. Cable length
09AAA033A  M¬¬FEET
09AAA033B M¬¬FEET
09AAA033C 7m (22.9 feet)

Mitutoyo AT112 Specifications

General

Brand	Mitutoyo
Model	AT112
Category	Scales
Language	English