Mityvac MV6835 User Manual

SPECIFICATIONS
Reservoir Capacity: 1.9 quarts
(1.8 liters)
Bleed Tube Length: 72 in. (1830 cm)
Evac Tube Length: 48 in. (1220 cm)
Working Pressure: 60 to 150 psi
(4.1 to 10.3 bar)
Air Consumption: 4.3 scfm @ 90 psi
(2.0 l/s @ 6.2 bar)
Vacuum
@ 30 psi (2.0 bar): 6.5 in. hg (22 kpa)
@ 60 psi (4.1 bar): 16.5 in. hg
(56 kpa)
@90 psi (6.2 bar): 26.5 in. hg
(90 kpa)
@150 psi (10.3 bar): 27 in. hg (91 kpa)
Fill Rate
@ 30 psi (2.0 bar): 24.5 oz/min
(725 ml/min.)
@ 60 psi (4.1 bar): 49.5 oz/min
(1460 ml/min.)
@90 psi (6.2 bar): 70.5 oz/min
(2095 ml/min.)
@150 psi (10.3 bar): 70.5 oz/min
(2095 ml/min.)
Page
Section
- MV26
- 1B
Form 822844
APRIL - 2005
VACUUM BRAKE BLEEDER
MODEL MV6830
USER’S MANUAL
Have Technical Questions?
If you have questions, or require technical
service, please contact our trained service
technicians at:
1-314-679-4200 ext. 4782
Monday - Friday 7:30 am to 4:15 pm CST
Visit our website at www.mityvac.com for
new products, catalogs and instructions for
product use.
Need Service Parts?
To order replacement or service parts, visit
us online at www.mityvacparts.com or call
toll free 1-800-992-9898.

Mityvac MV6835 Specifications

General

Brand	Mityvac
Model	MV6835
Category	Service Equipment
Language	English

Summary

Product Specifications (MV6830)

Reservoir and Tube Specifications (MV6830)

Details reservoir capacity and lengths of bleed and evac tubes.

Performance Specifications (MV6830)

Covers working pressure, air consumption, vacuum, and fill rates.

Brake Bleeder Kit Components (MV6830)

Important Precautions (MV6830)

Principle of Operation (MV6830)

Instructions for Bleeding Brakes (MV6830)

Removing Old Fluid from Brake Master Cylinder

Procedure to drain old fluid from the brake master cylinder.

Vacuum Bleed Brake Lines and Wheel Cylinders

Step-by-step guide for bleeding brake lines and wheel cylinders.

Instructions for Bleeding Hydraulic Clutch System (MV6830)

Removing Old Fluid from Clutch Master Cylinder

Procedure to drain old fluid from the clutch master cylinder.

Vacuum Bleed Clutch Lines and Cylinders

Steps for vacuum bleeding clutch master cylinder, slave cylinder, and lines.

Limited Warranty (MV6830)

Contact and Support Information (MV6830)

Reservoir Specifications (MVA6832)

Important Precautions (MVA6832)

Principle of Operation (MVA6832)

Instructions for Use (MVA6832)

MVA6832 Service Parts

Limited Warranty (MVA6832)

Contact and Support Information (MVA6832)

Declaration of Conformity