To Next PageTo Next Page
Need help?Do you have a question about the Mityvac MV8000 and is the answer not in the manual?
General| Weight | 2.5 lbs |
|---|---|
| Reservoir Jar Capacity | 500 mL |
| Power Source | Manual |
| Type | Vacuum Pump |
| Max Vacuum | 25 inHg |
| Included Accessories | Adapters |
| Application | Automotive |
| Vacuum Range | 0 to 25 inHg |
| Hose Length | 3 ft |
Kit to automatically replenish brake or clutch master cylinders during vacuum bleeding.
Auto-refill kit for master cylinders, offering improved features over MVA6825.
Kit for testing and diagnosing engine performance and mechanical functions.
Large fluid reservoir for brake bleeding and fluid collection/dispensing.
Details the hand-held vacuum pump's components and basic operation.
Explains how to release vacuum from the pump system.
Lists technical specifications like maximum vacuum and gauge accuracy.
Provides instructions on how to operate the vacuum pump for testing.
Explains what vacuum is, how it's measured, and its source in engines.
Covers how vacuum is distributed and common troubleshooting steps.
Detailed guide on interpreting vacuum gauge readings for engine diagnostics.
Key engine faults identified by vacuum gauge readings.
Describes the function and purpose of the PCV system.
Steps for checking and servicing the Positive Crankcase Ventilation system.
Explains how fuel pressure regulators maintain steady fuel pressure.
Procedures for visually inspecting and diagnosing fuel pressure regulators.
Explains the function of the EGR system in reducing NOx emissions.
Procedures for testing EGR valve operation and vacuum control.
Specific tests for GM ported, positive, and negative back-pressure EGR valves.
Testing procedures for Venturi Vacuum Amplifiers and Back-Pressure Transducer Valves.
Describes the purpose of Spark Delay Valves in controlling vacuum application.
Steps for testing the function and replacement of Spark Delay Valves.
Testing procedures for electrical/vacuum solenoids.
Procedure to test two-port vacuum switching valves using color codes.
Steps to test three-port vacuum switching valves with a vacuum pump.
Testing procedures for four-port PVS valves, covering upper and lower flow.
Specific precautions and procedures for Anti-Lock brake systems.
Step-by-step guide for bleeding automotive brake hydraulic lines.
Procedures for bleeding front and rear motorcycle brakes.
Process for bench bleeding a master cylinder before installation.
