Mityvac PNEUMATIVAC MV7300 - User Manual

Page
Section
- MV12
- 1D
Form 824555
MAR - 2009
PNEUMATIVAC
8.8 Liter/9.3 Quarts Capacity
Capacité 8,8 Litres/9,3 Pintes
Capacidad de 8,8 litros/9,3 cuartos de galón
MODEL/MODÈLE/MODELO MV7300
8.8 liter
Reservoir Tank
Réservoir de 8,8
litres
Depósito de 8,8
litros
Brake
Bleeder
Purgeur de
Frein
Purgador de
frenos
Dipstick
Tubes
Tubes de jauge
d’huile
Tubos de varilla
indicadora de
nivel
Recommended Inlet
Air Pressure: 80 - 120 psi
(5.5 - 7 bar)
Pression d’admission
d’air recommandée : 5,5 - 7 bars
(80 - 120 psi)
Presión de aire de entrada
recomendada:80 -120 lb/pulg²
(5.5 - 7 bares).

Summary

Precautions and General Guidelines

General Safety and Operational Notes

Includes warnings against forcing tubes and advice on reading instructions and tightening seals.

Using the PneumatiVac Away from a Compressed Air Source

Fluid Extraction Procedures

Extracting and Dispensing Motor Oil

Step-by-step guide for extracting motor oil from a vehicle's crankcase using the device.

Extracting and Dispensing Transmission Fluid

Procedure for extracting fluid from transmission cases and differentials.

Extracting and Dispensing Coolant

Instructions for extracting coolant from a vehicle's cooling system.

Extracting Brake Fluid from Master Cylinder

Detailed steps for extracting brake fluid from the master cylinder reservoir.

Bleeding Brakes

Bleeding Brakes Setup Instructions

Steps for connecting hoses and preparing the unit for brake bleeding.

Recommended Brake Bleeding Procedure

Guidance on performing the brake bleeding process, including order and technique.

Specialized Brake System Bleeding

Bleeding Anti-Lock Brake Systems

Notes on bleeding ABS systems and specific vehicle manufacturer requirements.

Bench Bleeding System

Procedure for bench bleeding a master cylinder before installation.

Lincoln Industrial Warranty Information

Standard Limited Warranty Details

Covers the general limited warranty terms, exclusions, and liabilities.

Special Limited Warranties

Details specific extended warranties for various Lincoln product series.

Contact and Customer Service

Information on contacting Lincoln for service and warranty inquiries.

Mityvac PNEUMATIVAC MV7300 Specifications

General

Type	Pneumatic Fluid Evacuator
Model	MV7300
Air Inlet	1/4" NPT
Power Source	Pneumatic
Vacuum	25" Hg