MIUFLY S2 PRO - Video Settings; Resolution Options; Image Quality; Pre;Post Recording

10
Setting
Description
Options
Resolution
The image resolution for video
2688×1512 30P
2560×1440 30P
2304×1296 30P
1920×1080 30P
1280×720 30P
864×480 30P
Coding
Format
The coding format of video files
H.264, H.265
Quality
The quality of the image for video and
photo files.
S. Fine, Fine, Normal
Pre-record
When on, a certain time (depends on
the video resolution) will be
combined into the recorded video
before record button is pressed to
start recording.
When off, video start until the Record
button is pressed to start recording.
Off, On
Post Record
The amount of the time the camera
waits to stop recording video after
you press the Record button.
Off, 5 secs, 1 min, 10
mins, 20 mins, 35 mins
Dewarp
When on, video distortion correction
will be corrected, with more power
consumption.
Off, On
CarDV Mode
When on, camera will power up
automatically and start video
recording when it is charged. Camera
will power off as it normally does
when it is disconnected from the
power source.
Off, On
Loop
Recording
When on, camera will overwrite the
oldest video file with the most
current video file once its memory is
full. This setting can be selected only
when car DVR mode is on.
Off, On
Split Time
While recording video, the camera
will automatically split its recording
into files of this length.
1 min, 3Mins, 5 Mins,
10 Mins, 15 Mins, 20
Mins, 30 Mins, 45Mins